Pilot Debrief

ROBINSON HELICOPTER R22 BETA near Arnaudville, LA — 2021-08-27

Final reportCEN21LA389
Sign in to save
Date
2021-08-27
Location
Arnaudville, LA, USA
Aircraft
ROBINSON HELICOPTER R22 BETA
Registration
N827SH
Category
Helicopter
Highest injury
Minor
Fatalities
0
Phase of flight
Landing

Probable cause

The loss of tail rotor drive due to a fatigue failure of the tail rotor gearbox output shaft, which resulted in a loss of control during landing.

NTSB narrative

While attempting to land at a staging location for a planned aerial application flight, the helicopter began to rotate to the right. The pilot was unable to regain control. The helicopter skids impacted a dirt field, and the helicopter rolled over onto its right side. The helicopter sustained substantial damage to its main rotor blades and fuselage. Disassembly of the helicopter for recovery revealed the tail rotor output shaft was fractured into two pieces. Examination of the output shaft revealed the fracture occurred between the mating tapered roller bearing and the bevel gear. The bevel gear side surface displayed progressive crack arrest marks consistent with fatigue cracking. Due to smear damage on the other fracture, it could not be determined if the fatigue cracking was the result of unidirectional bending fatigue (one origin) or reverse bending fatigue (two origins). The tail rotor output shaft function is to drive the tail rotor blades. A failed tail rotor output shaft would result in the loss of drive to the tail rotor blades, which in turn would cause a loss of tail rotor thrust to counter main rotor torque and loss of yaw control.

Analysis

Primary failure mode
Mechanical failure
First missed decision gate
Pilot could have aborted the landing when control was lost.

NTSB coding

Evidence available

  • Photos
  • 4 docket documents
View NTSB final reportView NTSB docket

Docket documents4

Related mishaps