Pilot Debrief

Bell 206 near Battle Mountain, NV — 2018-08-18

Final reportGAA18CA512
Sign in to save
Date
2018-08-18
Location
Battle Mountain, NV, USA
Aircraft
Bell 206
Registration
N8052G
Category
Helicopter
Highest injury
None
Fatalities
0

Probable cause

The pilot's failure to maintain the proper altitude and airspeed while flying in a canyon in gusting wind conditions.

NTSB narrative

The helicopter pilot reported that, while climbing out of a canyon at 30 knots indicated airspeed, about 50 ft above ground level, he felt a "hard vibration" in the cyclic and collective controls. He then saw that the airspeed gauge was reading 0 knots and felt the helicopter being pushed down. The torque indicator rose to 120% without any cyclic or collective control input. He applied right cyclic, lowered the collective, applied right pedal to counter the torque, and turned the helicopter downslope into the wind. He applied forward cyclic to better match the downslope of the terrain and raised the collective, but the skids impacted the ground, followed by the main rotor blades. The helicopter rotated 180º to the right before coming to rest downhill on its right side. Shortly after, a postimpact fire ensued, which destroyed the helicopter. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation. The pilot reported that the winds were gusting to 30 knots in the canyon and "changing direction every minute or so."

NTSB coding

Evidence available

  • Photos
  • 2 docket documents
View NTSB final reportView NTSB docket

Docket documents2

Related mishaps