Pilot Debrief

CUB CRAFTERS INC CC11 100 near Hillsboro, OR — 2017-08-24

Final reportGAA17CA507
Sign in to save
Date
2017-08-24
Location
Hillsboro, OR, USA
Airport
7S3
Aircraft
CUB CRAFTERS INC CC11 100
Registration
N599CC
Category
Airplane
Highest injury
None
Fatalities
0

Probable cause

The student pilot’s failure to maintain airplane control while landing in crosswind conditions and the flight instructor’s delayed remedial action.

NTSB narrative

The student pilot of the tailwheel-equipped airplane was practicing crosswind takeoffs and landings with the flight instructor. During the second landing, a few feet above the runway on short final, the airplane's nose turned sharply to the left. The student reported that his flight instructor yelled a command, took over the controls, and added full power. The flight instructor reported that, after he took the flight controls, he attempted to go around but was unsuccessful. The airplane continued to the left through low brush and down an embankment. The tailwheel struck the edge of the embankment, and the airplane then nosed over. Both wings and wing struts sustained substantial damage. The student pilot and flight instructor reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation. An automated weather observation station located about 7 miles north of the accident airport reported that, about 8 minutes after the accident, the wind was from 310° at 11 knots. The airplane landed on runway 2.

NTSB coding

Evidence available

  • 2 docket documents
View NTSB final reportView NTSB docket

Docket documents2

Related mishaps