BELL 206 near Lucerne Valley, CA — 2021-03-16
- Date
- 2021-03-16
- Location
- Lucerne Valley, CA, USA
- Aircraft
- BELL 206
- Registration
- N6133C
- Category
- Helicopter
- Highest injury
- Minor
- Fatalities
- 0
Probable cause
The pilot's failure to maintain aircraft control while maneuvering with a tailwind, resulting in the helicopter spinning and colliding with terrain.
NTSB narrative
The pilot reported that he departed from a dry lakebed with the intention of making a local flight for the passenger to photograph the area. He noted that the wind was from the southwest between 12-15 kts. After departure, the pilot was maneuvering the helicopter to the southeast about 300 ft above ground level (agl), where he was using the helicopter controls to compensate for a tailwind. The helicopter began to yaw to the right and the pilot attempted to regain control by applying full left pedal. Despite his attempts, the helicopter continued to rotate, and the yaw rate was increasing in speed. The helicopter descended and when it neared the ground, the pilot flared to cushion the touchdown for the rapid descent rate. The tail collided with the ground, followed by the skids contacting the desert floor hard; the helicopter came to rest on its right side. The fuselage and tail boom were substantially damaged. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.
NTSB coding
Evidence available
- Photos
- 2 docket documents
Docket documents2
Related mishaps
- CESSNA A188B
2026-07-29 · Algona, IA
- ROBINSON HELICOPTER COMPANY R44
2026-04-17 · Mount Blanco, TX
- ROBINSON HELICOPTER R22 BETA
2025-08-03 · Taylor, TX
- ROBINSON HELICOPTER COMPANY R44 II
2025-08-03 · Ponderosa Pines, MT
- AIR TRACTOR INC AT-502B
2025-06-23 · Charleston, MO
- PIPER PA-36-375
2025-06-19 · Huron, SD