CUB CRAFTERS CC18-180 near Crookston, MN — 2008-09-19

Probable cause

The pilot's failure to maintain directional control during landing and the flight instructor's delayed remedial action.

NTSB narrative

The purpose of the instructional flight was to gain experience in flying the tail-wheel-configured airplane from the rear seat. Both pilots were flight instructors. The supervising instructor was in the front seat. The instructor looking to gain experience was in the rear seat. The pilots began by conducting two touch and goes on the turf runway without incident. However, as more aircraft entered the traffic pattern for the intersecting paved runway they decided to use that runway. The initial approach and flare to that runway, 13 (4,300 feet by 75 feet, asphalt), were stable. After touchdown the airplane drifted to the left. As the rear seat (flying) pilot attempted to correct, the airplane veered to the right, departing the right side of the runway and nosing over. The supervising instructor reported that there were no failures or malfunctions associated with airplane prior to the accident.

NTSB coding

• Loss of control on ground · Landing-landing roll
• Delayed Action
• Experience / Qualifications

Related mishaps

• CESSNA A185F

  2026-06-27 · Angel Fire, NM

• CESSNA 180H

  2026-06-21 · Port Angeles, WA

• CESSNA 140

  2026-06-01 · Pasco, WA

• EAA Acro Sport II

  2026-05-31 · Sheridan, AR

• PITTS SPECIAL S-1S

  2026-05-29 · Bartlesville, OK

• GULFSTREAM AEROSPACE CORP GVII-G600

  2026-05-27 · Birmingham, AL