Pilot Debrief

CESSNA 310I near Sunnyside, WA — 2023-05-25

Final reportWPR23LA226
Sign in to save
Date
2023-05-25
Location
Sunnyside, WA, USA
Airport
1S5
Aircraft
CESSNA 310I
Registration
N6PK
Category
Airplane
Highest injury
None
Fatalities
0
Phase of flight
Landing

Probable cause

The failure of the side brace lock assembly of the right main landing gear due to overstress as a result of a hard landing.

NTSB narrative

The pilot reported that while on final approach he extended the gear, and a green light illuminated signifying that the gear was down. The landing was “firm” and, shortly after touchdown, the airplane’s right main landing gear slowly collapsed, causing the right wing to drop. The airplane veered to the right, exited the runway, and came to rest in a field about 100 ft from the runway centerline. During the accident sequence, the airplane sustained substantial damage to the right horizontal stabilizer and elevator. Postaccident examination of the right main landing gear fracture surface revealed that the side brace lock assembly likely fractured due to excessive axial compression loads that resulted in a ductile overstress fracture. Additionally, the bent side brace lock assembly attachment bolt at the lower end of the lock link also indicated that the loads associated with the failure of the attachment pin exceeded the design axial loads for the side brace lock assembly and were consistent with overload of the side brace lock assembly. The bearings and pin that attached the side brace lock to the lower end of the bellcrank, which were not recovered, were likely fractured as a result of the loads. The damage to the gear indicated that it likely failed as a result of the hard landing.

Analysis

Primary failure mode
Mechanical failure

NTSB coding

Evidence available

  • 2 docket documents
View NTSB final reportView NTSB docket

Docket documents2

Related mishaps