Pilot Debrief

CIRRUS DESIGN CORP SR20 near Eden Prairie, MN — 2012-10-02

Final reportCEN13CA007
Sign in to save
Date
2012-10-02
Location
Eden Prairie, MN, USA
Airport
KFCM
Aircraft
CIRRUS DESIGN CORP SR20
Registration
N750SR
Category
Airplane
Highest injury
None
Fatalities
0

Probable cause

The pilot’s inadequate braking action and decision to abort the landing near the departure end of the runway. Contributing to the accident was the pilot’s attempt to land near the midpoint of the runway.

NTSB narrative

The pilot reported that he flew a visual approach and landed near the midpoint of a 2,691-foot-long runway. The wind was at 5 knots and aligned with the runway, which was dry. After landing, the pilot applied “light/normal braking” but noticed his deceleration rate was inadequate to stop on the remaining runway. The pilot subsequently applied heavier braking, but the brakes “seemed to have no effect.” Realizing he was not going to stop the airplane on the remaining runway, the pilot attempted a go-around near the departure end of the runway. The airplane never became airborne, departed the runway, and impacted an airport perimeter fence. Substantial damage to the airplane included impact damage to both wings and ailerons. Skid marks from the accident airplane were documented near the departure end of the runway. A postaccident examination of the braking system of the airplane revealed no mechanical malfunctions that would have precluded normal operation.

NTSB coding

Evidence available

  • Photos
  • 4 docket documents
View NTSB final reportView NTSB docket

Docket documents4

Related mishaps