Pilot Debrief

CESSNA 152 near Wauchula, FL — 2009-01-18

Final reportERA09LA146
Sign in to save
Date
2009-01-18
Location
Wauchula, FL, USA
Aircraft
CESSNA 152
Registration
N6566P
Category
Airplane
Highest injury
None
Fatalities
0

Probable cause

A loss of engine power due to failure of the Number 3 connecting rod due to oil contamination. Contributing to the accident was the insufficient oil change time intervals performed by company personnel.

NTSB narrative

The pilot was climbing to 7,500 feet mean sea level when the engine started vibrating. The engine temperature increased and the engine stopped. The pilot realized that he could not make an airport and made a forced landing to a phosphate field. Examination of the engine revealed that it contained 6 quarts of dark black oil. The oil filter was removed and contained metallic contamination. Disassembly of the engine revealed dirt particle embedment on the Numbers 1 and 2 cylinder connecting rod bearings. The Number 3 connecting rod bearing was found disconnected from the crankshaft, with only small steel fragments remaining. The No. 3 connecting rod cap and associated broken rod bolts displayed overload signatures. The Number 4 connecting rod remained attached to the crankshaft and displayed heavy heat damage consistent with oil starvation. The operator reported that its maintenance personnel were performing oil changes during the 100-hour inspections. Lycoming Mandatory Service Bulletin 480E states that engines with a full-flow filtration system are required to have the oil changed at 50-hour intervals.

NTSB coding

View NTSB final report

Related mishaps