Pilot Debrief

Steven Hardie AIR CAM near Duncan Mills, CA — 2008-02-16

Final reportSEA08CA081
Sign in to save
Date
2008-02-16
Location
Duncan Mills, CA, USA
Aircraft
Steven Hardie AIR CAM
Registration
N30581
Category
Airplane
Highest injury
Minor
Fatalities
0

Probable cause

The pilot's failure to maintain clearance with power lines while maneuvering at a low altitude. Contributing factors included the pilot's decision to fly at low altitude and the sun glare condition.

NTSB narrative

The pilot reported that he was flying at a low altitude over a river into hazy conditions and looking directly into the setting sun. The pilot stated that as he was preparing to turn to miss a flock of birds the airplane impacted a set of transmission wires, which severed the airframe's wing support structures. The impact with the wires forced the airplane to a lower altitude and under a bridge in the airplane's flight path. After flying under the bridge and exiting on the opposite side, the airplane impacted a second set of transmission wires with the airplane's landing gear legs. The pilot then made a successful forced landing on a river gravel bar and came to rest upright. A witness, who was camping nearby, observed the airplane flying about 20 to 40 feet above the river before going out of sight. The witness reported, "Approximately 5 seconds later I heard a 'large impact,' followed by an electrical discharge sound and the power going out at the campground."

NTSB coding

View NTSB final report

Related mishaps