Pilot Debrief

CESSNA 180 near Naknek, AK — 2016-05-03

Final reportANC16LA024
Sign in to save
Date
2016-05-03
Location
Naknek, AK, USA
Airport
5NK
Aircraft
CESSNA 180
Registration
N6479X
Category
Airplane
Highest injury
None
Fatalities
0
Phase of flight
Landing

Probable cause

The overstress fracture and subsequent separation of the left main landing gear axle due to a hard landing, which resulted in the pilot’s inability to maintain directional control of the airplane.

NTSB narrative

The commercial pilot stated that, during the landing rollout in the tailwheel-equipped airplane, the left wheel axle fractured and separated from the airplane with the wheel attached. The left landing gear leg then dug into the runway surface, the airplane made a sudden left turn, and the left wing and left horizontal stabilizer struck the runway. An examination of the fractured left axle revealed features consistent with a bending overstress fracture. High magnification optical examination of the fracture also revealed several small fatigue cracks within the crack origin area. Although several fatigue initiation sites were present along the fracture origin area, none of them were large enough to have led to the failure or to have significantly lowered the ultimate strength of the axle enough for a bending overstress failure to occur under normal loading conditions. Therefore, it is likely the landing gear axle failed as a result of bending overstress due to a hard landing.

Analysis

Primary failure mode
Mechanical failure

NTSB coding

Evidence available

  • 3 docket documents
View NTSB final reportView NTSB docket

Docket documents3

Related mishaps