PIPER PA-30 near Rockport, TX — 2008-07-17

Probable cause

The pilot's failure to complete all cockpit checklist items prior to takeoff. Contributing to the accident was the pilot's failure to properly configure the landing gear switch.

NTSB narrative

The pilot was on the take off roll at approximately 90 knots when he took his hands off the throttles, and began applying back pressure for lift off. Almost immediately the aircraft began to sink followed by the sounds of the props striking the runway. All three landing gear were partially retracted as the airplane slid along the runway surface and came to a stop with resulting substantial damage to the belly structure. The pilot and both passengers were not injured. After the accident the pilot discovered that he had inadvertently left the landing gear switch in the "up" position while completing other items in the cockpit checklist. During the recovery operations the airplane was then jacked and the gear was lowered normally.

NTSB coding

• Landing gear not configured · Takeoff
• Checklist Use
• Preflight Inspection

Related mishaps

• Cessna R182

  2020-09-17 · Marksville, LA

• Piper PA28R

  2019-11-17 · Ogden, UT

• Beech 55

  2019-11-09 · Griffin, GA

• CESSNA T310R

  2013-02-17 · Casper, WY

• BEECH A36

  2012-08-07 · Washington, MO

• BEECH 58

  2012-07-01 · Atlanta, GA