Pilot Debrief

AMERICAN CHAMPION 7GCB near Pearsall, TX — 2013-09-02

Final reportCEN13LA518
Sign in to save
Date
2013-09-02
Location
Pearsall, TX, USA
Airport
T30
Aircraft
AMERICAN CHAMPION 7GCB
Registration
N9967Y
Category
Airplane
Highest injury
Minor
Fatalities
0
Phase of flight
Go-around

Probable cause

The failure of the rudder cable due to electrical arcing damage from contact with an unguarded battery and the pilot's subsequent loss of control during the go-around.

NTSB narrative

While in flight, the rudder cable separated. The pilot was able to return to the airport and align the airplane to land. During the landing flare, the airplane began to drift and the pilot was not able to correct the drift. The pilot initiated a go-around; however, the airplane then entered an aerodynamic stall and subsequently impacted the ground. Examination of the rudder cable separation area found localized melting, darkening, and oxidation consistent with electrical arcing. The elongation and oxidation of the overstressed wires was consistent with separation at high temperature. According to the pilot, the passenger had gotten his foot caught in the rudder cable. The pilot believed that the rudder cable came in contact with the battery at that time; the battery box did not have a cover, and the positive terminal of the battery was unguarded. The contact would have resulted in the electrical arcing and the subsequent cable separation.

Analysis

Primary failure mode
Mechanical failure
First missed decision gate
Pilot could have checked rudder cable integrity before flight.

NTSB coding

Evidence available

  • Photos
  • 6 docket documents
View NTSB final reportView NTSB docket

Docket documents6

Related mishaps