COSTRUZIONI AERONAUTICHE TECNA P2006T near Cleburne, TX — 2012-05-10
- Date
- 2012-05-10
- Location
- Cleburne, TX, USA
- Airport
- KCPT
- Aircraft
- COSTRUZIONI AERONAUTICHE TECNA P2006T
- Registration
- N727TA
- Category
- Airplane
- Highest injury
- None
- Fatalities
- 0
Probable cause
The pilot's inadvertent selection of flap 0 degrees during the go-around and the flight instructor’s inadequate supervision, which resulted in an aerodynamic stall at low altitude.
NTSB narrative
While practicing a simulated single engine landing during an instructional flight in a twin-engine airplane, the pilot receiving instruction approached the runway at a high rate of descent. The pilot initiated the landing flare too high and allowed the airspeed to decay. The flight instructor told the pilot to perform a go-around. However, during the go-around procedure, the pilot raised the gear, inadvertently retracted the flaps fully, and then commanded a 15- to 20-degree left bank, resulting in an aerodynamic stall. The instructor took control of the airplane and leveled the wings, but the airplane touched down hard and departed the left side of the runway. The fuselage and left wing sustained substantial damage during the runway excursion.
NTSB coding
Evidence available
- 1 docket document
Docket documents1
Related mishaps
- CESSNA 195
2025-11-28 · Downers Grove, IL
- CIRRUS DESIGN CORP SR22
2025-11-17 · Eastpoint, FL
- CESSNA R172
2025-10-05 · Mount Carroll, IL
- TOCI GABE C G SUPA
2025-09-19 · Palmer, AK
- CIRRUS DESIGN CORP SR22
2025-08-13 · Cleburne, TX
- CIRRUS DESIGN CORP SR22
2025-06-25 · Unionville, MO