Pilot Debrief

BELL 206-L4 near Cedar City, UT — 2026-05-23

Final reportWPR26LA199
Sign in to save
Date
2026-05-23
Location
Cedar City, UT, USA
Airport
CDC
Aircraft
BELL 206-L4
Registration
N917SU
Category
Helicopter
Highest injury
Minor
Fatalities
0

Probable cause

The flight instructor's failure to maintain helicopter control while manipulating the engine governor reference rpm adjustment during hover operations, which resulted in a loss of control and impact with the ground.

NTSB narrative

The flight instructor, who was flying from the left seat, reported that during the initial hover, the helicopter’s engine governor reference rpm indicated about 104%. To adjust the governor reference rpm, the instructor reached across to the right-seat collective-mounted governor INCR/DECR switch. As he contacted the switch, the instructor failed to maintain helicopter control, and the helicopter pitched nose up, moved aft, and descended. The flight crew reported that the helicopter contacted the ground, bounced, and began to spin out of control. Airport surveillance video showed the helicopter moving aft while descending before contacting the taxiway. The helicopter subsequently became airborne, rotated to the right, and impacted the ground. During the impact sequence, the tailboom and main rotor system separated from the helicopter. The pilot reported that there were no preaccident mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

NTSB coding

Evidence available

  • Video
  • Photos
  • 6 docket documents
View NTSB final reportView NTSB docket

Docket documents6

Related mishaps