CUB CRAFTERS INC CC18-180 near Anchorage, AK — 2014-10-19
- Date
- 2014-10-19
- Location
- Anchorage, AK, USA
- Aircraft
- CUB CRAFTERS INC CC18-180
- Registration
- N537CC
- Category
- Airplane
- Highest injury
- None
- Fatalities
- 0
- Phase of flight
- Landing
Probable cause
The pilot’s failure to maintain directional control while attempting to drag an off-airport landing site.
NTSB narrative
The commercial pilot was conducting a cross-country public aircraft flight. He stated that he was making a straight-in approach to the off-airport landing site that was wet and soft with the intention of dragging the landing surface. Upon touchdown, the airplane bounced slightly, settled back to the surface, and then veered left. Unable to correct for the veer, the pilot applied full power in an attempt to initiate a go-around, but the airplane impacted the elevated edge of a creek bank and then came to rest upright in the water, which resulted in substantial damage to the left wing, elevators, and rudder. A postaccident examination of the airplane revealed no evidence of mechanical malfunctions or failures that would have precluded normal operation.
Analysis
- Primary failure mode
- Loss of control
- First missed decision gate
- Pilot could have aborted the landing due to wet and soft conditions.
NTSB coding
Evidence available
- Photos
- 8 docket documents
Docket documents8
- Pilot/Operator Aircraft Accident Report, NTSB Form 6120.1form
- Pilot's Statementinterview
- Statement of Party Representatives to NTSB Investigationinterview
- Record of Conversation - Passengerother
- Record of Conversation - Pilotother
- Record of Conversation - Pilotother
- GPS - Specialists Factual Report (4 Embedded Images)photos
- Attachment 1 - GPS Specialists Factual Reportreport
Related mishaps
- SHERRY GROBSTEIN LSA-8X
2026-05-07 · Hyannis, MA
- CESSNA 182
2026-04-01 · Houston, TX
- CESSNA 180K
2026-03-27 · Beloit, KS
- CESSNA 172M
2026-03-09 · Solon Springs, WI
- BEECH C23
2026-02-12 · Knoxville, TN
- COSTRUZIONI AERONAUTICHE TECNA P-MENTOR
2026-02-11 · Des Moines, IA