MOONEY INTERNATIONAL CORP M20TN near Holly Ridge, NC — 2020-12-30
- Date
- 2020-12-30
- Location
- Holly Ridge, NC, USA
- Airport
- N21
- Aircraft
- MOONEY INTERNATIONAL CORP M20TN
- Registration
- N728VM
- Category
- Airplane
- Highest injury
- None
- Fatalities
- 0
Probable cause
The pilot’s failure to perform a go-around during an unstable approach to land which resulted in a landing area overshoot and a subsequent runway excursion.
NTSB narrative
The pilot reported that during the first landing attempt at the destination airport the airplane was too fast, so he performed a go-around. During his second attempt, he descended and touched down on the runway, however, he overshot his intended landing spot. He added that he did not believe a safe go-around could be performed after the touchdown, so he decided to continue the landing roll and applied max braking, however, the airplane overran the end of the runway and struck mower equipment located to the right of the runway. The left wing sustained substantial damage. The pilot reported that there were no mechanical malfunctions or failures with the airplane.
NTSB coding
Evidence available
- Photos
- 3 docket documents
Docket documents3
Related mishaps
- COMMANDER AIRCRAFT CO 114TC
2026-05-23 · Woodruff, WI
- CIRRUS DESIGN CORP SR22
2025-12-07 · Blue Bell, PA
- TEMCO GC-1B
2025-09-18 · Toledo, WA
- SCHWEIZER SGS 1-26C
2025-06-01 · Hampshire, IL
- CESSNA 177RG
2025-05-28 · Snohomish, WA
- CESSNA 150
2024-10-21 · Willis, MI