Pilot Debrief

AIRBUS HELICOPTERS AS350B3e near Skwentna, AK — 2025-08-20

Final reportANC25LA097
Sign in to save
Date
2025-08-20
Location
Skwentna, AK, USA
Aircraft
AIRBUS HELICOPTERS AS350B3e
Registration
N589SH
Category
Helicopter
Highest injury
None
Fatalities
0

Probable cause

The pilot’s inadvertent entanglement of a lightweight Kevlar long line into the helicopters operating main rotor system, resulting in a severe imbalance and separation of the main rotor gearbox.

NTSB narrative

The operator reported that the helicopter was being used to sling construction equipment to a remote mine site located in an area of steep mountainous terrain. After the pilot placed the external load at a prearranged site next to the drill pad, he maneuvered the helicopter to a landing site in an area of rock-covered terrain to disconnect and stow the lightweight Kevlar long line that was still attached to the helicopter’s cargo hook. After a successful landing, the pilot reduced the engine throttle to ground idle, locked the flight controls, then exited the helicopter with the engine and rotor still operating. As the pilot coiled the Kevlar long line into the helicopter, a portion of the line became entangled in the rock covered terrain, and the pilot pulled hard to free it. As the Kevlar long line suddenly released from the rocks, the recoiling line became entangled in the operating main rotor blades which resulted in a severe main rotor imbalance. As a result, the main rotor gearbox and entire main rotor system were subsequently ripped from the helicopter. The helicopter sustained substantial damage to the fuselage, tail boom assembly, and main rotor drive system. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

NTSB coding

Evidence available

  • Photos
  • 2 docket documents
View NTSB final reportView NTSB docket

Docket documents2

Related mishaps