Pilot Debrief

CESSNA 310R near Kansas City, MO — 2018-03-22

Final reportCEN18LA128
Sign in to save
Date
2018-03-22
Location
Kansas City, MO, USA
Airport
MKC
Aircraft
CESSNA 310R
Registration
N372WP
Category
Airplane
Highest injury
None
Fatalities
0
Phase of flight
Landing

Probable cause

The landing gear collapse due to the separation of the end fitting bolt for reasons that could not be determined based on the available evidence.

NTSB narrative

The airline transport pilot reported that the landing gear position lights were all green during the approach and that the landing was normal. During the landing rollout, the right landing gear collapsed. A witness stated that the landing appeared normal and was not a hard landing. The airplane skidded for about 1,200 to 1,500 ft and veered off the side of the runway, which resulted in substantial damage to the horizontal stabilizer and elevator. Examination of the airplane's landing gear parts that were broken revealed that the fracture features of the end fitting assembly mating adjustment screw, the bellcrank assembly bolt, and the flange were consistent with overstress. Examination of the fracture surfaces of the end fitting bolt revealed that it had separated through a thread root on the end of the bolt; however, the cause of the end fitting bolt separation could not be determined due to smearing and secondary damage of the fracture surface. Because the witness reported that the landing was not a hard landing, it is unlikely that the failure occurred during the accident landing sequence. It is likely that the separation of the end fitting bolt led to the landing gear collapse.

Analysis

Primary failure mode
Mechanical failure

NTSB coding

Evidence available

  • 3 docket documents
View NTSB final reportView NTSB docket

Docket documents3

Related mishaps