Pilot Debrief

ROBINSON HELICOPTER COMPANY R44 II near Sylva, NC — 2021-06-14

Final reportERA21LA252
Sign in to save
Date
2021-06-14
Location
Sylva, NC, USA
Airport
24A
Aircraft
ROBINSON HELICOPTER COMPANY R44 II
Registration
N443SH
Category
Helicopter
Highest injury
None
Fatalities
0

Probable cause

The pilot’s intentional departure from the procedures published in the manufacturer’s flight training guide, and his subsequent loss of engine rpm, rotor rpm, and aircraft control.

NTSB narrative

The pilot was demonstrating emergency procedures and non-standard maneuvers in the helicopter to a new hire pilot and a company sales representative. After several simulated engine failures and autorotations, the pilot initiated a “quick stop” maneuver. The maneuver he performed did not comport with the published procedure in the manufacturer’s flight training guide, and in some cases contradicted the factory guidance in the pilot’s admittedly “slightly modified maneuver.” The pilot initiated the maneuver about 40 ft. above the runway with about 40 knots airspeed. He reduced throttle, which was not directed, added left pedal, which was opposite of that directed, the engine and rotor rpm decayed, and the helicopter descended. The pilot said that he could not recover the engine or rotor rpm prior to the collision with the runway, which substantially damaged the helicopter. The 3 occupants of the helicopter egressed without injury. The pilot stated there were no mechanical deficiencies with the helicopter that would have prevented normal operation.

NTSB coding

Evidence available

  • Photos
  • 7 docket documents
View NTSB final reportView NTSB docket

Docket documents7

Related mishaps