Pilot Debrief

EUROCOPTER AS350B3 near Stevens Village, AK — 2013-03-24

Final reportANC13CA035
Sign in to save
Date
2013-03-24
Location
Stevens Village, AK, USA
Aircraft
EUROCOPTER AS350B3
Registration
N353DL
Category
Helicopter
Highest injury
None
Fatalities
0

Probable cause

The pilot’s inadvertent cyclic control input after landing, which resulted in the main rotor blades striking the ground.

NTSB narrative

The helicopter pilot was supporting a seismic drilling operation at a remote drill site. He had just completed moving one of the seismic drills via long line and had landed the high-skid, turbine-powered helicopter in a clear area to wait for the next move. After landing, before reducing the power to flight idle and locking the flight controls, the pilot opened the right-side door, returned his right hand to the cyclic, and leaned out to ensure the tail rotor was clear of obstacles. While looking rearward, the pilot inadvertently moved the cyclic to the right, and the helicopter rolled up on the right skid. He immediately applied left cyclic, but the main rotor blades struck the snow. The helicopter sustained substantial damage to the rotor system, tail boom, and fuselage. The pilot indicated there were no preaccident mechanical malfunctions or anomalies that would have precluded normal operation. The pilot noted that the accident might have been avoided if he had used the collective lock before engaging in activities outside the cockpit.

NTSB coding

Evidence available

  • 2 docket documents
View NTSB final reportView NTSB docket

Docket documents2

Related mishaps